ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
UL 508A SPACING
by ale348 - 03/29/24 01:09 AM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (ale348), 302 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#119019 11/22/04 10:24 PM
Joined: Oct 2000
Posts: 3,682
Likes: 3
Admin Offline OP
Administrator
Member
Quote
This "junction" box was in an attic of a house that I recently did a service change on. The oven wire, aluminum, was cut and tied to each side of the lugs. There were two 12-2 wires each pulling 110v off of the splice. There was also three #8 THHN wires tapped in carrying 220v to a barn. No doubt in my mind that this was not an electrician that did this "work".

- Br
[Linked Image]

[Linked Image]

#119020 11/22/04 11:22 PM
Joined: May 2003
Posts: 2,876
E
e57 Offline
Member
WOW! It's as if it were described to someone over the telephone.... "So all the wires come into a box ya see..." The person thinks to themselves... 'A box?' "How do them wires get in there?" - "Well ya pop a hole in the side...."


Mark Heller
"Well - I oughta....." -Jackie Gleason
#119021 11/23/04 01:21 AM
Joined: Jul 2004
Posts: 625
S
Member
Wow! Somebody went to a lot of effort to do the job wrong! (Where's that "scratching head" smilely when you need it?)

#119022 11/23/04 10:11 AM
Joined: Nov 2001
Posts: 745
M
Member
I'm impressed by the use of the white jumper wire to identify the neutral. [Linked Image]

Question: How DO you clamp a cable to a wooden box anyway? [Linked Image]

Mike (mamills)

#119023 11/23/04 07:37 PM
Joined: Nov 2004
Posts: 3
H
Junior Member
No connectors or staples to secure cables? How the wires even stayed their.

#119024 11/23/04 08:12 PM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Member
You'd almost think that them terminals had been stolen out of a motor. [Linked Image]

#119025 11/23/04 09:46 PM
Joined: Jun 2003
Posts: 1,143
D
Member
Hey, it's a lot more substantial than some of the "code compliant" and UL listed plastic boxes I've seen pass inspections [Linked Image]

#119026 11/26/04 02:26 PM
Joined: May 2004
Posts: 697
D
Member
This is what you get when carpenters do electrical work.

Dave

#119027 11/27/04 09:49 PM
Joined: Oct 2004
Posts: 17
W
Member
Quote
You'd almost think that them terminals had been stolen out of a motor.
Actually, it looks like he used parts from an old telephone wiring block.

James

#119028 11/28/04 03:39 AM
Joined: May 2003
Posts: 2,876
E
e57 Offline
Member
I was thinking those blocks were from an older electric range, dryer, or simular kitchen appliance. If memory serves me right they are bussed internal to the bakelite mounting, and the jumpers are superfluous. (extra... sorry for the $5 word) Reguardless, the whole instalation is a bogus animation, and an un-realistic counterfeit. Sh*%, it's just Da*$ funny! [Linked Image]


Mark Heller
"Well - I oughta....." -Jackie Gleason
Page 1 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5