ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 271 guests, and 12 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#1157 04/30/01 10:29 AM
Joined: Oct 2000
Posts: 4,116
Likes: 4
Member
To follow along with our series with the Taped/Untaped Plastic/Metal box .. etc
At what height do We put our outlets, switches, etc?

I personally go with 'Height of a Hammer' and 48 on center for switches. Countertop and Bathroom outlets @ 44.

Is this the norm? (except ADA)

Bill


Bill
#1158 04/30/01 05:48 PM
Joined: Nov 2000
Posts: 13
V
Vin Offline
Member
I generally follow these heights also. Of course in kitchen and baths I try to find out sizes of backsplashes and if wall tile is going to be used.

#1159 04/30/01 11:02 PM
Joined: Apr 2001
Posts: 449
F
Member
I use the hammer height for receptacles and 42" to center of box for switches and counter top receptacles. 42" keeps you away from mud joints and is clear of counter backsplashes on standard countertop height.

#1160 04/30/01 11:33 PM
Joined: Feb 2001
Posts: 60
S
Member
Outlets hammer height
switches 42" to the bottom of the box, easier to measure to bottom, and sheetrockers only have to cut one board, so you don't get loads of joint compound smeared into the box.
Kitchens 46" to the bottom of the box, has worked out in every house I've done. Usually puts the outlet midway between counter and top cabinet.

On stairways and landings I try to compensate for the depth or height of the landing to make the switch comfortable for the owner. I try not to deviate from the stock heights, because it makes finding a buried box harder, when you have to guess where to look.

#1161 05/01/01 07:25 AM
Joined: Nov 2000
Posts: 2,236
Likes: 1
Member
Hammer height on recepts...
(you guys with helpers, do you use the same brand of hammer?)

44" CL Counter Tops

On 8' ceilings, I measure 48 1/2" (top of box) from the ceiling to place switches, the drywallers only have to cut one piece this way, and they really appreciate that.



[This message has been edited by sparky66wv (edited 05-01-2001).]


-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI
#1162 05/01/01 07:31 AM
Joined: Oct 2000
Posts: 5,392
S
Member
Virgil,
ya gotta keep the drywallers happy!, else they use the long bits to knaw up your wires!
they also like consistent, so i use a precut stick of wood ( rec & sw).
[Linked Image]

#1163 05/01/01 08:39 AM
Joined: Oct 2000
Posts: 4,116
Likes: 4
Member
'66,

Good point with the brand of Hammer! I've had it happen. There can be quite a difference between the types of Hammer too!

Does anyone use an "Electrician's Hammer"?
I've got one that's never been used.

Sparky,

I once saw an adjustable 'Thingamabob' where you set the height and just laid the box on top and nailed it on. I saw it at one of the suppliers and thought it looked interesting, they never stocked it though. Your 'stick of wood' idea is cheaper. That's a keeper!

[Linked Image]
Bill


Bill
#1164 05/01/01 03:06 PM
Joined: Mar 2001
Posts: 2,056
R
Member
Quote
Originally posted by Bill Addiss:
'66,

Good point with the brand of Hammer! I've had it happen. There can be quite a difference between the types of Hammer too!

Does anyone use an "Electrician's Hammer"?
I've got one that's never been used.

Sparky,

I once saw an adjustable 'Thingamabob' where you set the height and just laid the box on top and nailed it on. I saw it at one of the suppliers and thought it looked interesting, they never stocked it though. Your 'stick of wood' idea is cheaper. That's a keeper!

[Linked Image]
Bill
Bill,
I have a steel electricians hammer. Long thin head to nail through the back of a box, when nails were more commonly used and a straight claw to remove the box later. Nice leather handle,13 3/4" long circa 1985.

#1165 05/01/01 05:09 PM
Joined: Oct 2000
Posts: 4,116
Likes: 4
Member
Redsy,

Sounds very similar to mine (Estwing) I was looking for a picture of one and couldn't find one. It has a Woodgrain handle long narrow nose/head. It just never had the right 'feel' for me and the head was too small for general purpose nailing (kept missing [Linked Image])

Bill


Bill
#1166 05/01/01 08:18 PM
Joined: Apr 2001
Posts: 449
F
Member
My wife bought me a Klein electrician's hammer. It has an extra long nose for nailing deep boxes in the back. It is also 16" from top of the head to the end of the handle. I have always set my boxes at 13" with a "standard" 16oz. straight claw hammer. I have my "electrician's hammer" hanging on display in the shop. Only used it one day.

Page 1 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5