|
1 members (Scott35),
386
guests, and
12
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jul 2002
Posts: 8,443 Likes: 3
OP
Member
|
Picture and info submitted by renosteinke: was on the roof of a restaraunt, replacing light bulbs, whan I came across this hazard. When the PoCo did their attachment, they failed to insulate their crimp connections. Of course, this did not prevent someone from mounting a light- atop the metal roof curb, less than a foot from 800 amps of heavenly transportation!. Click here for larger image Thanks John.
|
|
|
|
Joined: Apr 2004
Posts: 349
Member
|
Reno, I thought they did this on purpose so that service technicians working on the roof would have a handy power source they could clip onto - both 120V and 240V. No ??
Seriously, I've seen this exact thing many times down here, usually from the ground when I'm not in a position to do anything about it.
Radar
There are 10 types of people. Those who know binary, and those who don't.
|
|
|
|
Joined: Aug 2005
Posts: 214
Member
|
not to mention shock risk, I can just imagine hoe easy it would be in a high wind one night, one of those uninsulated line crimps starts banging against the bare POCO neutral...
|
|
|
|
Joined: Jan 2006
Posts: 558
Member
|
That used to be the norm around here actually, and it is very common to find a service with bare split bolts just floating... Had a roofer walk back into the service of the house behind me and blow a hole in his shirt... Had an actual PoCo employee arc out a service a few doors up from me.... Scary isn't it
|
|
|
|
Joined: Feb 2005
Posts: 219
Member
|
Hey, Reno is that a big hole in the roof across the parking lot? LOL
|
|
|
|
Joined: Feb 2005
Posts: 219
Member
|
and.....is that a Utility Co XFmr sitting on the sidewalk in front of the Salon next to Good Times?
|
|
|
|
Joined: Jan 2005
Posts: 5,445 Likes: 3
Cat Servant Member
|
SE, I went back and looked- and yes, it sure looks like one! It was kind of hard to be sure, what with several coats of paintes-over graffitti, and assorted merchandise piled against it (-:
|
|
|
|
Joined: May 2005
Posts: 178
Member
|
I'm not sure "mounting" is the right word to describe the light, either -- It looks like it's floating 1/2" above the wall. Interesting conduit work there: EMT into a 90 into a coupling into a nipple into a whatever. I hate seeing junk like that.
|
|
|
|
Joined: Apr 2005
Posts: 200
Member
|
not to mention shock risk, I can just imagine hoe easy it would be in a high wind one night, one of those uninsulated line crimps starts banging against the bare POCO neutral... more like a spectacular light show
Cliff
|
|
|
Posts: 44
Joined: August 2005
|
|
|
|
|