ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Do we need grounding?
by gfretwell - 04/06/24 08:32 PM
UL 508A SPACING
by tortuga - 03/30/24 07:39 PM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 205 guests, and 28 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#102252 12/07/05 05:08 AM
Joined: Oct 2005
Posts: 29
N
Navyguy Offline OP
Member
Looking for some comments regarding rule 6-206 (location of service equipment). This missed my radar from my previous post regarding the service change.

Does 6-206 read as each Apt panel must be in the actual apartment or in a common area or does it read that as long as they (the panels) are accessible and are free from unauthorized access they can be located anywhere?

In my case, the panels would be located in one apartment, with locked covers but could be accessed as needed through the landlord (master key). I know that I have been to many places where the occupant could not access “their panel” if needed. Relocating the panels to each apartment or to a common area is now a major undertaking.

Thanks for you comments.

Cheers

#102253 12/09/05 01:56 PM
Joined: May 2003
Posts: 1,158
Member
Sorry Navy Guy yes the tenants must have Access to there own panel which usually means in their own apartment. It would be very inconvenient to have to call the landlord to reset breakers.


BTW in British Columbia Only an Electrical Contractor could take this permit out as it cant fall under homeowner work as theres rental units involved,


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5