Thanks for the great input on my blue box fill discussion topic. I still had one area of the discussion that I am still wondering about. What are we supposed to do in an unfinished part of an upstairs that the homeowner now wants to finish. The only ciruit up there is 1 #14 on a 15 amp breaker that has a switch, basic light and 1 receptacle. The homeowner has framed in a bathroom and a small family room and wants to add about 4 receptacles, 1 GFI in the bathroom, a light for the family room and a vent/light combo for the bathroom. I could not make a new homerun and add a circuit The rest of the house is completely finished and the family of 5 is living there. I basically used the blue box that the switch was mounted in as a feed box for the rest of the receptacles. Before I have added a 4"x4" deep box where the vanity was going, or in a closet and brought my feed wire into that and then fed out from there to all other circuits. What would you guys do?
