#3's in 1

ECN Shout Chat

Give a Shout Out!

ShoutChat

Who's Online Now

0 members (), 392 guests, and 30 robots.

Key: Admin, Global Mod, Mod

Print Thread

Rate Thread

Re: #3's in 1"

#52451 05/26/05 08:32 PM

Joined: May 2005

Posts: 706

Crystal Lake, IL USA

T

Tiger

Member

It's physically possible to pull four 3ga. wires in 1" IMC. With some lube you shouldn't have any problem. Additional pull points to keep it to two bends per pull will help. I recently PUSHED three 3 ga. in 1" IMC in short runs with one bend.

Dave

Tools for Electricians:

Tools for Electricians, Installers, Maintenance & Service Technicians

Entire Thread
Subject	Posted By	Posted
#3's in 1"	Active 1	05/26/05 01:01 PM
Re: #3's in 1"	Celtic	05/26/05 07:29 PM
Re: #3's in 1"	Tom	05/26/05 10:17 PM
Re: #3's in 1"	Tiger	05/27/05 12:32 AM
Re: #3's in 1"	Celtic	05/27/05 04:41 AM
Re: #3's in 1"	Tiger	05/27/05 11:56 AM
Re: #3's in 1"	rcksmith127	05/27/05 12:26 PM
Re: #3's in 1"	William Runkle	06/03/05 12:35 AM
Re: #3's in 1"	Active 1	06/03/05 03:48 AM
Re: #3's in 1"	e57	06/03/05 08:15 AM
Re: #3's in 1"	e57	06/03/05 08:17 AM
Re: #3's in 1"	Active 1	06/03/05 02:49 PM
Re: #3's in 1"	Active 1	06/03/05 02:52 PM
Re: #3's in 1"	luckyshadow	06/03/05 04:06 PM
Re: #3's in 1"	Active 1	06/03/05 05:50 PM

Moderated by dougwells, electure, gfretwell, HotLine1, Scott35, Trumpy

Link Copied to Clipboard

Featured:

Electricians
Slate Coasters

* * * * * * *

Tools for Electricians

* * * * * * *

2023 NEC + Exam Prep Study Guides Now Available!

Member Spotlight

JoeKP
Berkley, MA

Posts: 144
Joined: March 2008

ECN Forum Forums General Topics of the Trade General Discussion Area #3's in 1"