Hammer drill for driving ground rods

ECN Shout Chat

1 members (Scott35), 128 guests, and 13 robots.

Key: Admin, Global Mod, Mod

Print Thread

Rate Thread

#38507 05/24/04 08:05 PM

Joined: Dec 2003

Posts: 524

Member

... I found it.. [Linked Image from hitachi.us]

DH38YE 1 1/2" Rotary Hammer Spline Shank

[This message has been edited by Attic Rat (edited 05-24-2004).]

.."if it ain't fixed,don't break it...call a Licensed Electrician"

Tools for Electricians:

Entire Thread
Subject	Posted By	Posted
Hammer drill for driving ground rods	Electric Ian	05/24/04 11:20 PM
Re: Hammer drill for driving ground rods	iwire	05/24/04 11:26 PM
Re: Hammer drill for driving ground rods	Attic Rat	05/24/04 11:42 PM
Re: Hammer drill for driving ground rods	Attic Rat	05/25/04 12:05 AM
Re: Hammer drill for driving ground rods	Ryan_J	05/25/04 01:09 AM
Re: Hammer drill for driving ground rods	Fred	05/25/04 02:39 AM
Re: Hammer drill for driving ground rods	BigB	05/25/04 03:24 AM
Re: Hammer drill for driving ground rods	caselec	05/25/04 04:18 AM
Re: Hammer drill for driving ground rods	Electricmanscott	05/25/04 10:00 PM
Re: Hammer drill for driving ground rods	Bill Addiss	05/25/04 10:05 PM
Re: Hammer drill for driving ground rods	ProCircuit	05/25/04 10:39 PM
Re: Hammer drill for driving ground rods	Sandro	05/25/04 10:44 PM
Re: Hammer drill for driving ground rods	ga.sparky56	05/25/04 10:53 PM
Re: Hammer drill for driving ground rods	macmikeman	05/27/04 06:12 PM