I was thinking the same thing as Njwirenutt, regarding the Rectifier's Diodes.
Kind of simple to make a 3Ø FW Rectifier's Diode array into a 1Ø FW Bridge setup.
For the Transformers, this may be tricky!
If they are separate 1Ø 2 wire type, then not such a problem. Setup as 1Ø input/output.
If they are common core 3Ø type... problem! Time to look for replacement 1Ø Transformers!
Either way, the Transformer sizes + the ampere rating of the Diodes will need to be adequate for the load drawn. Since the Rectifier is 'downsized" from the 3Ø setup, you will need to compensate for this by an increased 1Ø Bridge size.
Same goes for the KVA of the Transformers.
Got more questions? Feel free to post away!
Scott35
p.s. If you need schematics, let us know.
