I need to change a 240/120 motor from its current 240 configuration to 120 volts. The instruction plate for making this change is long gone. The motor voltage switching method is not the standard/general set-up.
The present 240 wiring is:
1) L2 is connected to T4.
2) T3 is connected to T2.
3) T1 is permanently connected to T5 (soldered) and both are connected to the back of the reset button.
4) L1 is connected to P1, which is connected to the reset button.
5) P2 from the reset button is not hooked up at all.
The biggest part of this puzzle that has me confused is that T1 and T5 are together. Does this mean that the motor cannot be switched to 120v (only reversed)? If anyone can help, I'd really appreciate it. Thanks
