Bill, yup, 4' level, that's how I nailed the switch boxes, honestly I thought I had allowed a good 1/2" assuming 3/4" for the FF, 36" for the countertop, 4" for the backsplash, plus a 1/2" buffer zone... but turns out the backsplash is larger than 4"! Plus, I also used a string to get the boxes flush with the drywall. If I had went off the stud on the two gang, it would have been off by a 1/2"! Can't get good lumber anymore..

The point man wanted them as close to the same CL as the recepts, which made it a tougher call too.
<gloat>

Kinda proud of them switch boxes, actually...
Another 1/8", and I would have been in a panic!

</gloat>

The stickers, I always put them in! And I tell the customers that what happens to the stickers after final punch-out is nothing that I can control... [Linked Image]

Kinda wish I had gotten another 3/16" in height on the Recepts, though... That would have been pretty!

Looks like I got a little more than the requested 2" spacing from the cover plate to the door trim, too. Nobody's said anything about it though...

[This message has been edited by sparky66wv (edited 10-10-2002).]

-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI