1 1/2

ECN Shout Chat

Give a Shout Out!

ShoutChat

Who's Online Now

0 members (), 390 guests, and 14 robots.

Key: Admin, Global Mod, Mod

Print Thread

Rate Thread

1 1/2" or 2" PVC LB

#13719 09/10/02 06:56 AM

Joined: Mar 2001

Posts: 2,056

Bucks County PA

R

Redsy

OP

Member

I have to "sleeve" 100 amp al. SER (3 #2, 1 #4) for physical protection. (TODAY!) I will need to run it through a PVC LB.
I would like to keep the piping as small as possible, but I'm afraid a 1 1/2" LB will be too tight.
Any (quick) help out there?

Tools for Electricians:

Tools for Electricians, Installers, Maintenance & Service Technicians

Entire Thread
Subject	Posted By	Posted
1 1/2" or 2" PVC LB	Redsy	09/10/02 10:56 AM
Re: 1 1/2" or 2" PVC LB	sparky66wv	09/10/02 11:05 AM
Re: 1 1/2" or 2" PVC LB	tsolanto	09/10/02 11:10 AM
Re: 1 1/2" or 2" PVC LB	Redsy	09/10/02 12:19 PM
Re: 1 1/2" or 2" PVC LB	resqcapt19	09/10/02 02:46 PM
Re: 1 1/2" or 2" PVC LB	Redsy	09/10/02 03:53 PM
Re: 1 1/2" or 2" PVC LB	Redsy	09/11/02 11:53 AM
Re: 1 1/2" or 2" PVC LB	tsolanto	09/11/02 09:40 PM
Re: 1 1/2" or 2" PVC LB	harold endean	09/12/02 12:43 AM
Re: 1 1/2" or 2" PVC LB	WARREN1	09/12/02 05:31 PM
Re: 1 1/2" or 2" PVC LB	tsolanto	09/12/02 09:20 PM
Re: 1 1/2" or 2" PVC LB	Redsy	09/13/02 04:32 PM
Re: 1 1/2" or 2" PVC LB	WARREN1	09/13/02 04:39 PM
Re: 1 1/2" or 2" PVC LB	Redsy	09/13/02 05:49 PM
Re: 1 1/2" or 2" PVC LB	Bjarney	09/13/02 07:48 PM
Re: 1 1/2" or 2" PVC LB	sparky66wv	09/14/02 12:29 AM