I've got to put a piece of 1/2" PVC through a porcelain brick wall. Having installed a few anchors in it, I've learned that the brick tends to eat up normal carbide tipped masonry bits rather quickly. What method and/or type of bit for do I need for this?

I'm thinking... Run drill on known working GFCI circuit, while running water on bit to keep it cool, no hammer action (will probably crack the brick) and go real slow.

A diamond tip bit would be good, but I doubt I have the resources to aquire one.

Any ideas?

[Linked Image]


-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI