I-Joist Drilling

ECN Shout Chat

Give a Shout Out!

ShoutChat

Who's Online Now

0 members (), 433 guests, and 18 robots.

Key: Admin, Global Mod, Mod

Print Thread

Rate Thread

Re: I-Joist Drilling

#120233 04/03/05 10:01 PM

Joined: Mar 2001

Posts: 333

So San Francisco CA

S

stamcon

Member

Mike, the center web is OSB(oriented strand board) and is probably about ½" thick. The compression and tension forces are dealt with the 2x3 top and bottom chords. http://www.osbguide.com/osb.html
steve

Steve

Tools for Electricians:

Tools for Electricians, Installers, Maintenance & Service Technicians

Entire Thread
Subject	Posted By	Posted
I-Joist Drilling	Admin	04/03/05 04:27 PM
Re: I-Joist Drilling	Trumpy	04/03/05 11:29 PM
Re: I-Joist Drilling	stamcon	04/04/05 02:01 AM
Re: I-Joist Drilling	trollog	04/04/05 03:18 AM
Re: I-Joist Drilling	stamcon	04/04/05 04:26 AM
Re: I-Joist Drilling	Ryan_J	04/04/05 01:41 PM
Re: I-Joist Drilling	renosteinke	04/04/05 02:35 PM
Re: I-Joist Drilling	Ryan_J	04/04/05 04:51 PM
Re: I-Joist Drilling	walrus	04/04/05 10:37 PM
Re: I-Joist Drilling	gideonr	04/05/05 10:37 PM
Re: I-Joist Drilling	electure	04/06/05 10:52 AM
Re: I-Joist Drilling	Alan Belson	04/06/05 11:18 AM
Re: I-Joist Drilling	Ryan_J	04/06/05 01:28 PM
Re: I-Joist Drilling	renosteinke	04/06/05 02:15 PM
Re: I-Joist Drilling	Ryan_J	04/06/05 04:16 PM
Re: I-Joist Drilling	Alan Belson	04/06/05 10:40 PM
Re: I-Joist Drilling	Trumpy	04/07/05 07:52 AM
Re: I-Joist Drilling	Alan Belson	04/07/05 08:41 PM
Re: I-Joist Drilling	Admin	04/09/05 04:58 PM
Re: I-Joist Drilling	denny3992	04/14/05 02:51 AM
Re: I-Joist Drilling	ironman	04/14/05 03:33 PM
Re: I-Joist Drilling	gideonr	04/14/05 07:19 PM
Re: I-Joist Drilling	electure	04/14/05 08:03 PM
Re: I-Joist Drilling	Alan Belson	04/14/05 09:47 PM
Re: I-Joist Drilling	renosteinke	04/15/05 01:29 AM
Re: I-Joist Drilling	makokiller	04/20/05 05:36 PM
Re: I-Joist Drilling	gideonr	04/20/05 08:22 PM
Re: I-Joist Drilling	Ryan_J	04/20/05 09:47 PM
Re: I-Joist Drilling	renosteinke	04/21/05 12:46 AM