[Linked Image]
Quote
This is typical of what I am dealing with on this job. The boxes in the picture are not in a 1 hour rated wall but there are other just like them that are. Of course the fix is to fill them with mud. So when we go to trim out the job the mud will fall out in large chunks. This is typical of the quality we are dealing with on this job and there are over 1500 device boxes. Maybe they will get it down before the end. (And maybe I'll hit the lottery)

BTW: Take a good look at the rings. These are boxes made by a small company named Fab Works. The rings adjust out up to 2 inches by running the two adjacent screws in with a drill motor. This is the first time I have used them and I am sold. If someone puts plywood on the wall or the back of a cabinet that wasn't shown...No problem. Just adjust the ring out to fit!

Nick