The Flex is Metal dryer vent hose, The 4/0 SER is the Line side comming down from MDP about 100' down the hall , clipped to the concrete above , I do have a pic of that ,it was a gem of a job , but I figured this was enough , The Pvc runs out and under ground to the other building ,
The part is being torn down , but to know someone did this is enough ,
Yesterday , I found a service 100 A , has 2" cond with 100 meter socket ( NO by-pass , which is required ) #2's feeding a panel with a 200 A main , and the drop crossed a parking lot and had a drip loop that was at about 8' from the ground , not to mention all the pipe only had about 2 clips in it .
Oh and let's not forget there was NO PERMIT!
I don't have enough time to post all the stuff I have in my note book called " Hall Of Shame" which gets about 5 entries a week !!!
HV
[This message has been edited by HIGHVOLTAGE (edited 06-15-2002).]
